|
| ¹ |
Open date |
Descriptions |
Status |
| 1 |
03.07.2009 |
OSC “Ilyich Iron and Steel Works” invites bids for the auction sale of four-roll mills of ËÍ 469 Model, fabrication year 1966.
Bidding venue: Ukraine, Mariupol, ul. Levchenko 1, Headquarters Conference Room
Bidding type: Open bidding
Subject of bidding: ËÍ 469 Model Four-Roll Mills
Quantity of products to be bought: 1 pcs.
Parts included into the assembly: As per specification
Shipping conditions: FCA-Works
(to be loaded by Vendor onto the Purchaser’s transport)
Terms of payment: 100% prepayment
Four-roll mills of ËÍ 469 Model, fabrication year 1966
1.Manufacturing works: Works of Founding Machines and Automated Lines «SIBLITMASH» («ÑÈÁËÈÒÌÀØ»).
2.Specifications:
Maximum dimensions of bendable sheet, mm
a)thickness at 25 kgf/mm2
- bending without edge turndown - 40
- bending with edge turndown - 28
b)width - 3150
Minimum bending radius, mm - 480
Bending speed, m/minute - 6,8
Diameter of upper roll, mm - 600
Maximum gap between upper and lower rolls, mm - 120
Maximum movement of bending rolls, mm - 470
Lifting speed of bending rolls, mm/minute - 144
Maximum bevel of upper roll, degree - 2,5
Height of machine above floor level, mm - 2540
Dimensions of the machine, mm
a)from left to right – 10 570
b)from face to back – 3 900
c)height – 3 880
d)weight – 97 712 kg.
Quantity of electric motors - 5
a)motor of main drive gear – 100 kw
revolutions per minute – 584
b)motor of bending rolls – 22 kw revolutions per minute - 690
c)motor of rotary vane-type pump - 5,5 kw revolutions per minute - 970
d)total capacity of all motors - 155 kw
3.Technical state:
Roll mills have been in operation since 1966 till 2005ã. Complete overhaul - in 1998.
4.Complete set of rolls:
Mechanical parts:
a)wearing of worm-and-worm gear at side (lateral) rolls,
b)wearing of barrels of side rolls,
c)solenoids at oil station, oil leakage,
d)damage of upper roll seats near reducer,
e)wearing of taper shank of upper roll
Electrical parts:
a)lack of cable and electric wiring,
b)lack of two buttons on control panel,
c)lack of mounting electrical schematic diagram.
The following is available:
a)motor of main drive gear – 1 piece
ÌÒÍ 711-10-100 kw, 584 rpm
b)motor of bending rolls – 2 pieces ÌÒÊÍ-412-8-22 êw, 690 rpm
c)motor of rotary vane-type pump – 1 piece
À02-51-6- 5,5 êw, 970 rpm
At present four-roll mills of ËÍ 469 Model are dismantled and stored at the Works site.
|
|
|
|
Current active tenders
